We’re big fans of the latter look as part of a sparkly New Year’s Eve ensemble, which is why we wanted to share the easy steps to Honestly WTF’s DIY Ear Cuff. Turned off by notion of making your own jewellery? Don’t be. This professional-looking sparkler is a far cry from your preschool macaroni necklace. Besides, we’re guessing you might have a little time off for the holidays, so why not get crafty??
- (5) 8 x 4mm Swarovski navette rhinestones & settings
- (6) 11 x 3mm Swarovski navette rhinestones & settings
- (1) 2 x 40mm curved gold tube
- (1) flat glue-on post
- (1) stabilizer clutch
- a pair of flatnose pliers
- a pair of wire cutters
- a hammer
- a toothpick
- E6000 glue
?- thin piece of cardboard
Lay out a working surface to protect your table (a thin piece of cardboard works well), and hammer the hollow gold tube flat. The flattened hollow gold tube will be referred to as the “curved piece”. Use the flatnose pliers to flatten and even out the texture on the curved piece.
Pull the working surface off the edge of a table. Pierce a hole and push the earring post through the working surface. Squeeze a dollop of E6000 glue onto a disposable spoon.
Use a toothpick and apply a generous amount of glue onto the flat post. Glue the curved piece to the center of the flat post. Allow to dry for 10-15 minutes before applying more glue and attaching the shorter rhinestones to the flat post. Use the pliers and toothpick to help manoeuvre the rhinestones. Allow to dry.
Add more glue along the curved piece and add the longer rhinestones, one piece at time in an alternating pattern.
Use the toothpick to add glue along the sides of the rhinestones each time for extra hold. Dry overnight.
Use wire cutters to trim away the excess metal. Check for any potentially loose pieces and add more glue. Allow to dry for at least another day before wearing. And be sure to back it with a stabilizer clutch to help keep the ear cuff from drooping.